Mustang Motorcycle Products Inc. "America's Choice for Comfort" since 1980
Solo Seats-- Comfortable Alone or With a Compatible Rear
- Measures a full 3 inches wider than the standard
- The extra wide foam shape is internally supported for guaranteed comfort
- A full front bucket seat for the rider is trimmed with a braided edge skirt that comes down over the frame and fender for a clean, uninterrupted look
- The seat has a no frills, vintage look with a braided edge skirt but no studs or conchos
- The included Driver Backrest offers more features than any other backrest on the market--
1. Pivots to match your back angle
2. Pad measures 7"H x 12"W x 1.5" thick and is contoured to match your back
3. Folds completely forward for ease of getting on your motorcycle
4. Rounded thumb screw adjusts backrest forward and back up to 2" while you are seated (an offset post that leans you back another 2" is sold separately [Part Number 75099])
5. Easily snaps into four height positions or comes out completely with no tools necessary (you don't have to remove your seat)
6. When backrest is not in use, the receptacle's slot is covered by a leather flap held tightly with a Velcro® closure for a smooth, clean appearance
7. and of course-- Excellent back support
- Made in the U.S.A
Width- 16.5"
Baseplate Features:
- Formed 16 gauge steel baseplates are black epoxy powder coated on both sides for complete rust proofing. (Carpeting protects fender paint)
- Polyurethane rubber bumpers are strategically located and riveted to minimize vibration and prevent the baseplate from touching the frame and fender (will not crack with age and are ozone protected)
All one-piece formed steel baseplates have two sets of holes for the supplied chrome bracket to bolt into--
1. The first set of holes closest to the rear of the seat is for all Dyna Wide Glide models
2. The second set of holes is for all Dyna Glide models
Once in place the slotted chrome bracket aligns with the threaded hole in the fender.
For When You Want a Passenger--
Buying a solo seat gives you the option to add or remove a rear seat when needed. Just choose your Solo then pick from one of four coordinating Rear Seats available from Mustang. Compatible seats listed below.
Recessed Rear Seat (Sold Separately): Part Number [79139]
Recessed/Long Rear Seat for Wide Glide Only (Sold Separately): Part Number [79137]
(Recessed seats are specially cut to allow for movement of the backrest)
Thin Rear Seat (Sold Separately): Part Number [75788]
Standard Rear Seat (Sold Separately): Part Number [75755]
Note: The backrest knob will press slightly into the front of the Standard Rear Seat
and for when you're riding solo...
Matching Fender Bib: Part Number [78055 or 78060]
