Feuling 487 Chain Drive Cam Kit with Race Series Lifters for '17-24 Harley Davidson M8 Touring Models

Feuling 487 Chain Drive Cam Kit with Race Series Lifters for '17-24 Harley Davidson M8 Touring Models

Bolt in, 487 Reaper Chain Drive Camshaft, Cam Installation Kit for 114" and 117" engines. Race Series Lifters are included in this kit. This cam responds very well to increased bore and or compression and maintains the bottom end power; pulls hard above 2,950 rpm when compared to stock.

Cam Installation Kit

• Includes cam bearing, cam/crank hardware and gasket/O-ring kit
• Allows for installation of the factory one piece pushrods or optional Feuling® heavy duty HP+® 0.165 wall one piece pushrods
• Race Series lifters
• Hydraulic lifters have a full 0.200 of total travel
• Designed with a slower bleed down rate to handle heavy valve spring pressures
• Increase engine RPM before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the Milwaukee Eight front exhaust camshaft lobe flange
• Made in the USA
• Heavy duty one piece pushrods are highly recommended.
• Feuling® fastener kit is recommended to help prevent cylinder head cracking.
• A high flow exhaust system and air cleaner is highly recommended for optimal performance.
• High Lift valve springs are required on stock cylinder heads, Screamin Eagle cylinder heads have high lift valve springs but will need to be verified.

Feuling® does not recommend tuning beyond stock emissions standards. Not legal for sale or use in California on any pollution controlled motor vehicles.

FITMENTS