Ciro Standard Driver Floorboard Highway Peg Mounts for '09-24 Touring - Chrome

Ciro Standard Driver Floorboard Highway Peg Mounts for '09-24 Touring Models

• Strong, adjustable mounting system with a design that integrates into the floorboard area without being obtrusive
• Folds out of the way and are the best option with fairing lowers
• Replaces factory front floorboard mount, no drilling or modifications needed for installation
• Mounts to factory bolt locations
• Includes left and right floorboard mounts, left and right arms, and left and right clevises
• All necessary hardware for completing installation provided
• If you have aftermarket exhaust check the right side floorboard mounts. If they have spacers installed you will need one more to install the Ciro Frame Mounted HWY Peg Mounts. You might also need a longer bolt (3/8-16) to go with the spacer. The spacer and bolt can be found at most hardware stores or from your exhaust manufacturer. The additional spacer is needed because the Ciro design uses one more bolt than the stock front floorboard mount.
• Works with OEM and aftermarket footpegs with Harley-Davidson style 1/2" male mount.
• Works with or without engine guards.
• Will not work with Harley-Davidson Empire Rider Footboard kits.

Length10 cm / 4"

Not compatible with the 2025+ Street Glide Ultra, 2023.5+ models equipped with H-D Fairing Lowers (P/N 57400504xxx), or models with H-D Switchback Mini Floorboards (P/N 50502668 or 50502669), as well as the 2024 CVO Road Glide ST with factory mini floorboards (conversion to full-size floorboards is required for use on these models, see fitments for more details).