Ciro Driver Floorboard Highway Peg Mounts for '09-Up Harley Davidson Touring Models - Black
(NOT for '24-up Street Glide & Road Glide)
- Perfect solution to the challenge of adding comfortable highway pegs on a bike with fairing lowers
- Replaces front footboard mount, does not reduce ground clearance
- Fully adjustable design
- Include Ciro ratcheting footpeg spring assembly so you can utilize stock-style male-mount footpegs
- Complete with hardware
Fitments
(For the following new Harley-Davidson models, '23-'24 CVO Street Glide, , '23-'24 CVO Road Glide, '24 Street Glide, '24 Road Glide use sku 60101)
Electra Glide models:
- 2014 CVO Ultra Limited Electra Glide
- '09-'13 CVO Ultra Classic Electra Glide
- ‘09-'19 Electra Glide Ultra Classic
- ‘10-'24 Ultra Limited
- ‘16-'18 CVO Ultra Limited
- ‘20-'21 CVO Limited
- ‘09-'23 Street Glide
- ‘14-'23 Street Glide Special
- '10-'12 CVO Street Glide
- '10 & ‘19-'22 Standard
- '09 Electra Glide
- '09-'13 Electra Glide Classic
- ‘22-'23 Street Glide ST
- 2021 Revival
Road Glide models:
- '15-'16 CVO Road Glide Ultra
- '09 & '15-'23 Road Glide
- '15-'23 Road Glide Special
- '10-'13 & '16-'24 Road Glide Ultra
- '18-'22 CVO Road Glide
- '09 CVO Road Glide
- '12-'13 CVO Road Glide Custom
- "10-'13 Road Glide Custom
- '20-'24 Road Glide Limited
- 2023 Road Glide Special Anniversary
- 2023 CVO Road Glide Limited Anv
- '22-'23 Road Glide ST
Road King models:
- ‘17-'24 Road King Special
- '13-'14 CVO Road King
- ‘09-'22 Road King
- ‘09-'19 Road King Classic
Tri Glide models:
- ‘09-up Tri Glide Ultra
- ‘15-up Freewheeler
- '23-up Road Glide 3
Will not fit: 2023 Street Glide CVO FLHXSE & 2023 Road Glide CVO FLTRXSE
Installation Notes:
Models that do not have the factory engine guard installed my need to supply the factory mounting hardware (not included in kit) that is used to attach the engine guard to the frame.
Models with aftermarket headers or floorboard spacers:
Some aftermarket exhausts use floorboard spacers. If you have aftermarket exhaust check the right side floorboard mounts. If they have spacers installed you will need one more to install the Ciro Frame Mounted HWY Peg Mounts. You might also need a longer bolt (3/8-16) to go with the spacer. The spacer and bolt can be found at most hardware stores or from your exhaust manufacturer. The additional spacer is needed because the Ciro design uses one more bolt than the stock front floorboard mount. Please feel free to contact Ciro if you have any questions 715-808-0027.
Please note: We have found that some Harley-Davidson Defiance Rider Floorboards (P/N 50500640) will have to be lightly modified on the bottom side of the board to work. The Harley-Davidson Empire Rider Footboard p/n 50501932 & 50501933 they will have limited arm adjustments back toward the driver.
