Baker Drivetrain Armored Attitude Chain Adjuster for '06-17 Dyna, '07-17 Softail, and '17-23 M-Eight Touring Models
(Not for M8 Softail Models)
Stronger than the original for those with more abusive inclinations!
Prevent damage to your motorcycles left side motor case bearings, inner primary bearings, clutch hub bearings and transmission output gear bearings. If you have a 2006 or later Dyna, or a 2007 and later Softail/ Touring bike you know the issues that come along with the stock auto chain tensioner. At the first moment that the chain has any slack in it, the auto tensioner ratchets the shoe up another notch. Now one notch is not going to be an issue, but the tightening never stops and this causes several problems. Our manual chain tensioner allows you to set the chain to the proper 5/8”-7/8” (cold) freeplay, and never have to worry about it being too tight.
- Manual chain tensioner allows you to set the chain to the proper 5/8"-7/8" (cold) freeplay and never have to worry about it being too tight
- 28% finer teeth spacing (compared to '01-'06 chain adjuster) for more accurate adjustments
- Active Plate and Back Support Plate investment cast with 4130 Steel
- Chain shoe machined from Nylon 66
- Increases torque by 3.42 ft/lbs
- Reduces primary noise
- Help prevent damage to primary
- Improves motor bottom end and inner primary race bearing durability
- Made in the U.S.A.
- 2006-2017 Dyna Models
- 2007-2017 Softail Models
- 2007-2023 Touring Models
The Armored Attitude Adjuster is an excellent solution for any non-racing application. Replacement shoe sold separately.
